INSIDE: Depending on what materials your crystal is made of, water may damage them. Use this list of what crystals should not go in water to keep your crystals safe.
Whether you come across a crystal naturally, purchase one from a shop, or are gifted a crystal by a friend, you’ll want to cleanse them from past energy. Naturally, your first instinct to may be to submerge it in water, but this act of love could do more harm than good for some crystals.
Other reasons you may want to place your crystal in water is to create a crystal elixir by charging the water you are consuming.
All crystals are made up of different minerals and materials and because of this, some crystals can be cleansed and charged in water, and some cannot. Comparatively, some crystals can be charged by the sun, and others will fade or break when exposed to the sun.
One method to determine if your crystals are safe to be placed in water is to understand where they fall on the MoH’s Hardness Scale. This scale rates crystals from 1-10, with 1 rating the crystal as the softest and 10 being the hardest.
A general rule of thumb to ensure your crystals will be safe in water is as follows:
- What crystals should not go in water? = those that are rated 1-5 on the MoH’s scale
- What crystals can go in water? = those that are rated 6-10 on the scale
Below is a short list of what crystals should not go in water and the reasons why.
Why Shouldn’t Certain Crystals Be Placed in Water?
In general, the softer the material of a crystal, the more likely it is to dissolve in or be damaged by water.
Here are some additional reasons why many crystals should be kept away from water…
Some Minerals Are Too Soft
Many crystals that cannot be exposed to water are made of minerals that are too soft to handle the water element. When exposed to water, their surface may break off or dissolve.
PLEASE NOTE: The list we have provided below is not a comprehensive list. If any of your crystals are not outlined on this what crystals should not go in water list, do a quick google search to see where your crystal falls on the MoH’s scale. Any crystal that is 5 and below will be too soft to handle when being submerged or cleansed in water.
It’s External Structure is Too Porous
Some crystals are porous, meaning they have tiny holes on their surface, which will allow water to seep through to the inside. This may cause your crystal to corrode or break apart when water seeps in.
Contain Metals in Crystals Will Rust
Crystals such as Hematite contain metals within them, and when exposed to water, they can rust, change its coloring and challenge the crystal’s structural integrity.
What Crystals Should Not Go in Water?
Now, let’s look at some of the most popular crystals that should be kept away from water…
Selenite
Selenite is made of gypsum, which is a soft sulfate mineral often used to make plaster, chalk, drywall, and fertilizer.
This stone makes to the ‘what crystals should not go in water’ list because it falls at a 2 on the MoH’s hardness scale. In fact, there are very few other crystals that are softer than Selenite.
Selenite’s minerals are much too soft and porous to handle water and can dissolve easily when mixed with liquid substances.
Fluorite
Fluorite is rated a 4 on the MoH hardness scale. While it can handle short exposure to water to be cleansed, continuous exposure will affect its strength.
This stone’s chemical structure is made of Calcium Fluoride. Salt is Sodium Fluoride, and when these two substances are combined, it causes Fluorite to deteriorate. This chemical reaction makes this stone especially unsafe in salt water.
Sodalite
Sodalite falls between a 5 and 6 on MoH’s hardness scale which makes it a crystal that is capable of being cleansed in water, but the trouble lies in soaking your Sodalite in fresh or salt water for longer periods of time.
Sodalite contains cracks that may be difficult to the eye to see, but continuous exposure may widen these cracks to a breaking point over time.
Lepidolite
Lepidolite falls between 2 and 3 on the MoH’s hardness scale. Due to its softness, this stone will unfortunately flake apart if exposed to water. As its flaky material breaks up in water, this beautiful crystal may also lose its shine as a result.
Angelite
Angelite is a 3-4 on the MoH’s hardness scale, making it a fairly soft stone. When exposed to water, its structure may be compromised and can therefore break apart or crumble. Keep this crystal on your ‘what crystals should not go in water’ list.
Apatite
Apatite falls at a 5 on the MoH hardness scale, making its exposure to water questionable. But more importantly, due to cracks on its surface, when Apatite is exposed to water for longer periods of time, it may lead to breakage.
Malachite
Malachite falls between 3 and 4 on the MoH’s hardness scale. It also contains copper, so when it is exposed to water, it has the potential to rust.
We highly suggest…
Click here to read this complete article.
